Double Vacuum Microdermabrasion Tips

Double vacuum tip consist of two parts: the outer stainless steel case with a smooth rim and the dermabrasion bit, covered with diamond chips.

The tip can be used without dermabrasion bit as a vacuum massage ventouse.

 

To remove or fasten the dermabrasion bit if needed, insert the coin into the groove in the center of the tip:

 

DV diamond tip1

 

Rotate the coin to the LEFT to unscrew the bit or to the RIGHT to fasten it:DV diamond tip2

 

Here is how the removed bit looks like – it has a screw path on the end. To reinstall the bit, simply screw it back into the tip case and fasten with the coin.DV diamond tip3

 

6mm tip (for small areas) does not have a groove. It still can be removed if needed.

Place the small cotton filter on the top of a diamond bit to protect the bit and your finger.

DV diamond tip4

 

Press hard on the top of the bit, and turn the stainless steel case to the LEFT with the other hand, releasing the bit.

DV diamond tip5

Here is how the removed bit looks like – it has a screw path on the end. To reinstall the bit, simply screw it back into the tip case. Fasten in the same manner: pressing on the top of a tip with your finger and rotating the stainless steel case to the RIGHT.

DV diamond tip6

Watch the video that demonstrates how to disassemble the tips:

 





Leave a Reply